Step-by-step: the first 10 minutes
- Turn off the water at the stopcock (usually under the kitchen sink). Turn it clockwise.
- Switch off the electricity at the consumer unit if water is near sockets, lights or appliances.
- Turn off the boiler and any immersion heater.
- Open all cold taps to drain the system. If you have a loft tank, open the bath taps too.
- Catch the water with buckets and towels and move valuables out of the way.
- Take photos and video of the damage for your insurer.
- Call an emergency plumber, and warn the neighbours below if you live in a flat.
Why pipes burst in London
Freezing is the classic cause: water expands as it turns to ice, splitting pipes in lofts, outside walls and unheated extensions. But many London bursts happen all year round from corroded old lead or galvanised pipes, failed push-fit joints, high mains pressure or accidental damage during DIY.
Temporary fixes while you wait
With the water off, you can wrap a small split tightly with a rubber pipe repair tape or self-amalgamating tape as a temporary measure. This is only to limit drips. It is not a repair, and the pipe must be properly replaced.
We prioritise emergency call-outs and confirm when your engineer will arrive.
Emergency Plumber in LondonAfter the repair
Leave affected ceilings and walls to dry. Don’t switch lights back on in wet ceilings until an electrician has checked them. Your plumber should test the repaired section under pressure and check the rest of the system for weak spots. Keep the invoice and photos for your insurance claim.
Frequently asked questions
Does home insurance cover burst pipes?
Most buildings and contents policies cover “escape of water” damage, and many include trace and access. The pipe repair itself may or may not be covered, so check your policy wording.
How do I stop pipes freezing?
Lag pipes in lofts and outside walls, keep the heating on low (around 12°C) when you are away in winter, and fix dripping outside taps.
Local help