Plumbing & heating advice from London engineers
Practical guides on fixing common problems, understanding costs and staying safe and legal, written by our Gas Safe engineering team.
How to find and turn off your stopcock (and what to do in a leak)
Knowing where your stopcock is turns a flood into a puddle. Here’s how to find it in a typical London home and shut it off in seconds.
5 min read HeatingBoiler losing pressure? Causes, fixes and when to call an engineer
Low boiler pressure is the most common reason we get called out in winter, and often you can fix it yourself in five minutes.
6 min read HeatingHow much does a new boiler cost in London? (2026 price guide)
A fully installed combi boiler in London typically costs £2,000–£3,800. Here’s what drives the price and what a good quote should include.
7 min read EmergenciesHow much does an emergency plumber cost in London?
Emergency plumbing prices in London vary wildly. Here’s what is fair, what is not, and the questions to ask before anyone sets off.
5 min read LandlordsLandlord gas safety certificates: the rules every London landlord must follow
Gas safety is one of the few landlord duties that carries criminal penalties. Here’s exactly what the law requires and how to stay compliant across a portfolio.
6 min read HeatingFrozen condensate pipe: how to thaw it and get your boiler working
When London drops below zero, frozen condensate pipes cause thousands of boiler breakdowns. It’s often a five-minute fix.
4 min read DrainageBlocked drain in London: who is responsible, you or the water company?
Knowing whose drain is blocked can save you a bill. The rules changed in 2011, and many Londoners still pay for blockages that aren’t theirs.
5 min read HeatingCommon boiler fault codes explained: Worcester, Vaillant, Baxi & Ideal
A fault code is your boiler telling you what’s wrong. Here are the ones we see most often in London homes, and what to do about each.
7 min read EmergenciesBurst pipe? What to do in the first 10 minutes
Speed matters more than anything with a burst pipe. Follow these steps in order, then call an emergency plumber.
4 min read HeatingNo hot water from your combi boiler? 7 causes and fixes
No hot water is one of the most common combi boiler faults. A few checks can save you a call-out. Here’s how to narrow it down.
6 min read HeatingHow to bleed a radiator (and when bleeding isn’t enough)
A radiator that’s warm at the bottom and cold at the top has trapped air. Bleeding it takes five minutes and a radiator key.
4 min read HeatingPower flush cost in London: is it worth it?
A power flush in London typically costs £400–£800 depending on radiator count. Here’s when it’s worth it and when it isn’t.
5 min read HeatingBoiler service cost in London (and what a proper service includes)
A boiler service in London usually costs £80–£130. Here’s what you should get for that money, and the red flags of a rushed job.
4 min read PlumbingLow water pressure in a London home: causes and fixes
Low pressure is a common complaint in London, especially in older terraces and upper-floor flats. The fix depends on the cause.
6 min read HeatingCombi vs system boiler: which is right for your London home?
The right boiler depends on how many bathrooms you have, your water pressure and how much space you can spare.
6 min read BathroomsHow much does a new bathroom cost in London? (2026)
A full bathroom refit in London typically costs £6,500–£15,000+. Labour, layout changes and tiles drive most of the difference.
6 min readRather we just fixed it?
Engineers at your doorstep. Fixed price agreed before any work starts.