Engineers at your doorstep · West, South West & South London

Heating · 4 min read

Frozen condensate pipe: how to thaw it and get your boiler working

When London drops below zero, frozen condensate pipes cause thousands of boiler breakdowns. It’s often a five-minute fix.

How to tell if it’s the condensate pipe

  • It’s below freezing outside
  • The boiler shows a fault or lockout code and won’t restart
  • You hear gurgling from the boiler
  • A white or grey plastic pipe runs from the boiler to an outside drain

How to thaw it safely

Never use boiling water, because it can crack the plastic pipe. Don’t climb ladders to reach high pipes in icy conditions. Call us instead.

  • Find the plastic pipe outside, usually 21–32mm, running to a drain
  • Find the frozen section, usually at the lowest point or the open end
  • Pour warm (not boiling) water along the pipe, or hold a hot water bottle against it
  • Repeat until water flows freely
  • Reset the boiler following the manufacturer’s instructions

How to stop it happening again

A permanent fix usually means re-routing the pipe internally where possible, increasing its diameter to 32mm outside, insulating it with weatherproof lagging, or fitting a trace heater. We can do this during a repair visit.

Boiler still not working after thawing? Our Gas Safe engineers can usually fix it the same day.

Boiler Repair in London

Frequently asked questions

Can a frozen condensate pipe damage my boiler?

Not usually. The boiler locks out to protect itself. But repeated freezing can damage the condensate trap, so a permanent fix is worthwhile.

Why does my boiler have a condensate pipe?

Modern condensing boilers recover extra heat from exhaust gases, creating mildly acidic water that drains away through this pipe.

Fast response

Need a plumber?

Engineers at your doorstep. Fixed price agreed before any work starts.

07506 605605

Book an engineer · Step 1 of 5

What do you need help with?

Service

Secure · No spam

WhatsApp us