What should my boiler pressure be?
Most combi and system boilers should sit between 1 and 1.5 bar when the heating is cold, rising to about 2 bar when hot. Below 1 bar the boiler may lock out and show a low-pressure fault code. Above 3 bar the safety valve may discharge water outside.
Common causes of pressure loss
- Bleeding radiators, which releases water along with air.
- A small leak on a radiator valve, pipe joint or towel rail.
- A failed expansion vessel, which makes pressure climb when hot and drop when cold.
- A faulty pressure relief valve. Check whether the copper pipe outside is dripping.
- A hidden leak under floors or in underfloor heating.
How to repressurise a combi boiler
Some boilers, including several Worcester Bosch and Vaillant models, have a built-in key or lever instead of a hose. Check your manual.
- Turn the boiler off and let it cool.
- Find the filling loop, usually a silver braided hose or a blue lever/tap under the boiler.
- Open both valves slowly and watch the gauge rise to about 1.2–1.5 bar.
- Close both valves fully. If it’s a detachable loop, remove it.
- Turn the boiler back on and reset it if needed.
When to call an engineer
Topping up once after bleeding radiators is normal. Topping up every few days is not, because it means water is escaping somewhere. Ignoring it lets fresh oxygenated water into the system, which speeds up corrosion and sludge.
Call a Gas Safe engineer if pressure drops more than once a week, if the relief valve pipe is dripping, if pressure goes above 2.5 bar when hot, or if you can see water inside the boiler casing. Never remove the boiler casing yourself.
Pressure keeps dropping? Our Gas Safe engineers find the cause and fix it, with a fixed price agreed first.
Boiler Repair in LondonFrequently asked questions
Is it dangerous if my boiler pressure is low?
Low pressure is not dangerous. The boiler simply shuts down to protect itself. High pressure (above 3 bar) should be checked by an engineer.
Why does my boiler pressure go up when the heating is on?
A small rise is normal as water expands. A big rise towards 3 bar usually means the expansion vessel has lost its air charge or the filling loop is letting by.
How much does it cost to fix a boiler losing pressure?
It depends on the cause: re-charging an expansion vessel or replacing a relief valve is a modest repair. We diagnose for £95, credited against the repair.
Local help