Engineers at your doorstep · West, South West & South London

Heating · 7 min read

Common boiler fault codes explained: Worcester, Vaillant, Baxi & Ideal

A fault code is your boiler telling you what’s wrong. Here are the ones we see most often in London homes, and what to do about each.

Before you do anything

Check that your gas supply is on (does the hob light?), that the boiler has power, and that the pressure gauge reads 1–1.5 bar. Many “faults” are caused by a prepayment meter running out, a tripped fuse or low pressure. Never remove the boiler casing. Only a Gas Safe registered engineer may work inside a gas appliance.

Worcester Bosch

  • EA 227 / EA 229: no flame detected or ignition failure. Check the gas supply and condensate pipe, then reset once.
  • CE 207 / A1 (older models): low system pressure. Repressurise to about 1.2 bar.
  • D5: outside or flow temperature sensor fault. Needs an engineer.

Vaillant

  • F22: low water pressure. Repressurise using the filling loop.
  • F28: ignition failure on start-up. Check gas and the condensate pipe, then reset.
  • F29: flame lost during operation. Often a gas supply or condensate issue.
  • F75: pump or pressure sensor fault. Needs an engineer.

Baxi

  • E119: low water pressure. Repressurise.
  • E133: gas supply interruption or ignition failure. Check the gas supply and meter.
  • E168 / E125: circulation or ignition faults. Needs an engineer.

Ideal

  • F1: low water pressure. Repressurise.
  • L2: ignition lockout. Check gas and condensate, then reset.
  • F2: flame loss. Often a frozen condensate pipe in winter.
  • F3 / F4: fan or sensor faults. Needs an engineer.

Code keeps coming back after a reset? Book a Gas Safe engineer. Most repairs are completed on the first visit.

Boiler Repair in London

How many times should I reset?

One or two resets is reasonable after you’ve checked gas, power, pressure and the condensate pipe. If the code returns, stop. Repeated resetting can mask a genuine fault and won’t fix a failed component.

Frequently asked questions

Are boiler fault codes the same on every model?

No. Codes vary between manufacturers and sometimes between models from the same brand. Check your user manual or tell us the make, model and code when booking.

Can a boiler fault code be dangerous?

Most codes are the boiler protecting itself. If you smell gas, leave the property and call the National Gas Emergency number on 0800 111 999 immediately.

Fast response

Need a plumber?

Engineers at your doorstep. Fixed price agreed before any work starts.

07506 605605

Book an engineer · Step 1 of 5

What do you need help with?

Service

Secure · No spam

WhatsApp us