What you need
- A radiator key (from any hardware shop) or a flat screwdriver for newer valves
- An old towel or cloth
- A small container to catch drips
How to bleed a radiator
- Turn the heating off and let the radiators cool, because hot water can scald.
- Find the bleed valve at the top corner of the radiator.
- Hold the cloth under it and turn the key anticlockwise about a quarter turn.
- You’ll hear hissing as air escapes. When water starts to come out, close the valve (clockwise).
- Repeat on other cold radiators, starting with the one furthest from the boiler on the lowest floor.
- Check the boiler pressure gauge and top up to about 1.2–1.5 bar if needed.
When bleeding doesn’t work
If a radiator is cold at the bottom but warm at the top, the problem is sludge (iron oxide) settling inside it, not air. Bleeding won’t help. A chemical clean or power flush is needed. If the water you bleed is black or brown, that’s a strong sign of sludge in the system.
If one radiator stays cold entirely, the valve may be stuck or the system may need balancing.
Cold radiators or sludgy water? A power flush restores heat output and protects your boiler.
Central Heating & Radiators in LondonFrequently asked questions
How often should I bleed my radiators?
Only when you notice cold spots at the top. If you need to bleed them often, air is getting into the system and an engineer should find out why.
Why did my boiler lose pressure after bleeding?
Bleeding releases water as well as air, so a small pressure drop is normal. Top up using the filling loop.
Local help