Engineers at your doorstep · West, South West & South London

Heating · 6 min read

No hot water from your combi boiler? 7 causes and fixes

No hot water is one of the most common combi boiler faults. A few checks can save you a call-out. Here’s how to narrow it down.

Quick checks first

  • Is the boiler showing a fault code or a red light?
  • Is the pressure gauge between 1 and 1.5 bar?
  • Is the gas on? Try the hob, and check your meter has credit.
  • Is the boiler’s hot water setting turned up and switched on?
  • Has there been a power cut? Some boilers need a reset afterwards.
  • In freezing weather, check whether the condensate pipe is frozen.

The 7 most common causes

  • Low system pressure: repressurise using the filling loop.
  • A frozen condensate pipe: thaw it with warm water.
  • A faulty diverter valve. Classic symptom: heating works but taps run cold, or radiators heat up when you run a tap.
  • A failed flow sensor or switch, so the boiler doesn’t detect the tap opening.
  • A blocked plate heat exchanger. Very common in London’s hard water: hot water is lukewarm or fluctuates.
  • Ignition or flame failure, usually with a fault code.
  • Thermistor (temperature sensor) faults causing temperature swings.

What you can and can’t do yourself

Repressurising, thawing the condensate pipe, resetting once and checking settings are all safe DIY steps. Anything that involves removing the casing (diverter valves, sensors, heat exchangers) must be done by a Gas Safe registered engineer by law.

Most no-hot-water faults are fixed on the first visit. Our vans carry diverter valves, sensors and heat exchangers for the major brands.

Boiler Repair in London

Hard water and London boilers

London has some of the hardest water in the UK. Limescale builds up in the plate heat exchanger and slowly chokes hot water flow. A scale reducer or inhibitor fitted on the cold supply protects your boiler, and we can descale or replace a scaled heat exchanger.

Frequently asked questions

Why do I have heating but no hot water?

On a combi, this most often points to a stuck or failed diverter valve, or a faulty flow sensor. Both need a Gas Safe engineer.

How much does it cost to fix no hot water?

Diagnosis is £95, credited to the repair. A diverter valve replacement typically starts from £245 and a pump from £265, fitted.

Fast response

Need a plumber?

Engineers at your doorstep. Fixed price agreed before any work starts.

07506 605605

Book an engineer · Step 1 of 5

What do you need help with?

Service

Secure · No spam

WhatsApp us